News
The latest from Gengwen Electric — product releases, technical articles and factory updates.
-
03 2026-11
How to Crimp a Cold-Press Terminal: The Five-Step Method That Actually Works
Pliers do not cold-weld anything. Match the parts, strip to length, clean to bright copper, crimp perpendicular, pull to verify — plus the VW 60330 three-zone cross-section criteria and the Sb ≥ 0.75×S over-compression limit.
-
02 2026-11
Crimp Terminal Model Codes Explained: RV, UT, DBN and OT Decoded
Decode a crimp terminal code in three parts: family, wire-range band, stud hole. Family comparison for RV/UT/DBN/SNB/PTN/SC/OT/DT, wire-band quick reference, the OT open barrel in detail, and three selection traps.
-
02 2026-11
Crimp Terminal Standards: The Handbook Nobody Reads That Decides Whether Your Terminal Will Burn
JB/T 2436, T/ACCEM, USCAR-21 and VW 60330 — what each standard actually requires, the 30 K and 45 K temperature-rise limits, the three crimp cross-section zones, and the ±0.03 mm automotive tolerance.
-
01 2026-11
What Are Crimp Terminals Made Of? Tin Plating vs Silver Plating
T2 copper or brass? Why more than 90% of crimp terminals are tinned rather than silver plated, how to identify the plating on the part in your hand, and a material selection table covering seven environments.
-
31 2026-10
Copper Lugs: The “Life-or-Death Joint” in Your Cable, and Why Your Crimped Terminals Keep Burning
The char mark in your switchgear is rarely the breaker — it is the crimp. A look at copper lug material, the 45 K temperature-rise limit, contact resistance and the mistakes that start fires.
-
30 2026-10
Crimp Terminal vs Copper Lug: Six Differences That Decide Your Choice
Thin-wall sleeve versus solid copper tube, compared across six dimensions: manufacture, wall thickness, cross-section, current, mechanical strength and acceptance standard — with a load-current selection table and six cases where a crimp terminal must not be used.
-
30 2026-10
Do You Really Need Crimp Terminals? The Cost of Saving a Few Cents
What happens if you skip the crimp: contact resistance climbing through thermal cycling. Four connection methods compared, the cost arithmetic, and seven applications where a crimp terminal genuinely is not needed.
-
04 2026-10
How to Select a DT Copper Lug When All You Know Is the Load Power
Voltage does not drive copper lug selection — current does. Here is the ampacity table, the three-step selection method and the two mistakes that cause most overheating.
-
04 2026-10
How to Select a DT Copper Lug Properly
What the DT series copper lug actually is, why the closed oil-block tail matters, and the six real applications where it does the heavy lifting — from switchgear feeders to EV charging.
-
21 2026-09
Gengwen Electric Holds 2026 New Product Launch in Wenzhou
Gengwen Electric launched its 2026 product range in Wenzhou: the full copper lug series upgraded to T2 copper, UL and VDE certified pre-insulated terminals, and crimp terminals spanning 0.5–95 mm².